P75 P76 GEAR PUMP

PGP075/076

  • Flows to 128 GPM
  • Pressures to 3000 psi
  • Speeds to 2400 rpm
  • Two-speed valves
  • Piggybacks
  • Winch motors
  • Flow dividers
PARKER P76 GEAR PUMP

p75 p76 Series Rolling Bearing High-Pressure Gear Pump (Motor)

Product Features:

  • Compact structure, small size, low noise, high pressure, and wide flow range
  • High-strength cast iron housing with an external gear pump design
  • Unique secondary sealing structure for effectively enhancing gear pump performance
  • Advanced side plate structure with special surface treatment, providing superior pressure resistance and wear resistance
  • Special bearing support structure, ideal for heavy loads and impact conditions
  • Standardized, universal, and modular design. Can be configured as double or multi-stage pumps; both pumps and motors offer various mounting and connection options, with dimensions conforming to SAE standards

P75/P76 Hydraulic Gear Pump Performance Data

Flow mL/rev G.W in Rated Pressure MPa Max Pressure MPa Speed RPM Highest lowest Input power KW
67.19 1＂ 20.7 24.2 2400  600 64
83.99 1 1/4＂ 20.7 24.2 2400  600 79.5
100.78 1 1/2＂ 20.7 24.2 2400  600 95
117.58 1 3/4＂ 20.7 24.2 2400  600 110.5
134.37 2＂ 17.2 20.7 2400  600 105
151.18 2 1/4＂ 17.2 20.7 2400  600 118
167.97 2 1/2＂ 17.2 20.7 2400  600 132
184.77 2 3/4＂ 13.8 17.2 2400  600 116
201.56 3＂ 13.8 17.2 2400  600 126

P75/P76 Hydraulic Gear Pump Performance Data

Flow mL/rev
Input Flow
2000 RPM
LPM		 G.W
in		 Rated Pressure
MPa		 Max Pressure
MPa		 Speed RPM Highest lowestOutput power KW Output Torque
Nm
67.19 157 1＂ 20.7 24.2 2200 600 43.5 207.8
100.78 223 1 1/2＂ 20.7 24.2 2200 600 61.8 295.2
134.37 295 2＂ 17.2 20.7 2200 600 68 324.8
167.97 365 2 1/2＂ 17.2 20.7 2200 600 84.5 403.7
201.56 431 3＂ 13.8 17.2 2200 600 81.5 387

Note:
The data in the table represents average values obtained from a series of experimental tests.

Test Conditions:

  • Oil temperature: 50℃
  • Oil viscosity: 31.8 cSt @ 38℃