G101 102 DUMP PUMP SERIES

• 9.5 to 29 gpm @ 1800 rpm
• Pressures to 2500 psi
• Speeds to 2400 rpm
• 2- and 3-line installations
• Choice of mountings
• Air shift kits available
• Relief valve protects pump and cylinder

SERIES 110 / 112
Description Reference* Used
INTEGRAL GEAR SETS
110 Gear Set -15 314-2915-740 101
110 Gear Set -20 314-2920-740 101
110 Gear Set -25 314-2925-740 101
151 7/8″ 13 Spl Gear Set-15 313-2915-230 102
151 7/8″ 13 Spl Gear Set-20 313-2920-230 102
151 7/8″ 13 Spl Gear Set -25 single 313-2925-130 102
GEAR HOUSING
110 Housing -15 314-8215-100 common
110 Housing -20 314-8220-100 common
110 Housing -25 314-8225-100 common
SEC – SHAFT END COVERS
110 ShaftEnd Cover 314-5039-201 101
151 SEC 4 Bolt 4″ B 313-5037-201 102
PEC – PORT END COVERS
110 PEC 101
112 PEC 102
THRUST PLATES
110 Thrust Plate 391-2185-016 101
151 ThrustPlate 102
BEARINGS
151/125 Roller Bearing 391-0381-059 common
SEALS
125 ShaftSeal Motor C 101
125/151 Body Seal 391-2884-021 common
151 Shaft SealMotor I 391-2883-115 102
RING SEALS
151 Ring Seal 391-2585-009 common
O-RINGS
131/151 Pocket Seal for 2 plates 391-2882-051 common
SPACERS
151 Bearing Spacer 391-3383-087 102
KEYS
290 Key 1/4″ x 3/8″ x 1 1/4″ 391-1781-021 101
SNAP RINGS
151Snap Ring SEC 391-2686-065 102
110 Snap Ring SEC 101
BOLTS, STUDS, NUTS
290 Bolt 5/8″ UNC 391-1401-405 102
290 Bolt 5/8″ UNC 101
290 Bolt 5/8″ UNC 101
290 Stud 5/8″ unc 07.5″ 391-1425-110 102
290-131/151/230/2505/8″ washer 391-3784-028 common
290-5/8″ Nut 391-1451-076 common